Hiring an electrical engineering consulting firm isn’t like buying a commodity. Two proposals for the “same” study can produce very different results: one gives you a report your team can act on, the other gives you a binder nobody opens.

The difference usually shows up only after the work is done. These eight questions help you see it before you sign.

1. Is the Work Sealed by a Licensed Professional Engineer?

Power system studies, arc flash studies, and electrical designs should be performed under the direction of a licensed Professional Engineer (PE). Ask whether the PE who seals the work is licensed in your state, and whether that engineer actually reviews the analysis or simply signs at the end. Insurers, inspectors, and attorneys will all care about this if something goes wrong.

2. What Experience Do You Have With Facilities Like Ours?

A hospital, a data center, a manufacturing plant, and a multi-tenant office building all have different priorities. Hospitals worry about life safety systems and redundancy. Plants worry about motor loads and downtime. Ask for examples of similar projects and what challenges came up. A good electrical consulting service company will talk about your constraints, not just their capabilities.

3. Which Codes and Standards Do You Work To?

The answer should include the National Electrical Code (NFPA 70), NFPA 70E for workplace electrical safety, NFPA 70B for maintenance, and IEEE 1584 for arc flash calculations. Follow up by asking which editions they use. A firm still running arc flash calculations on outdated methods can produce labels that don’t reflect your actual hazards.

4. How Do You Collect Field Data?

This question separates strong firms from weak ones. Every study depends on accurate data from your equipment: transformer ratings, breaker types and settings, cable sizes and lengths, and utility fault current. Ask:

  • Who collects the data: engineers, trained field technicians, or subcontractors?
  • How is data checked for accuracy before analysis?
  • What happens when they find equipment that doesn’t match your drawings?

Garbage in, garbage out applies here more than almost anywhere else.

5. What Exactly Is in the Scope and Deliverables?

Vague proposals lead to change orders. Ask for a written scope that lists what’s included: which equipment will be modeled, which studies will be performed, whether updated single-line diagrams and arc flash labels are included, and how many rounds of review you get. Compare proposals line by line, not just by total price.

6. Can You Support Related Needs Under One Roof?

Electrical work rarely stops at one deliverable. An arc flash study often leads to training needs. A thermographic inspection can reveal problems that affect protective device performance. A load study may lead to a design project. Firms that offer studies, inspections, training, and design together can connect findings across services, so you aren’t coordinating three vendors who never talk to each other.

7. Will a Non-Engineer Understand Your Report?

Your facility team, your CFO, and your safety director all need to act on the results. Ask to see a sample report. Look for a clear executive summary, prioritized recommendations, and plain explanations of what each finding means for safety, cost, and operations. If the sample is 200 pages of software output with no interpretation, expect the same for your facility. Firms that educate rather than just deliver are also better at clearing up common myths, like the ones in our post on arc flash hazard misconceptions.

8. What Happens After the Report Is Delivered?

Ask how the firm supports you after the study. Will they answer questions while you implement recommendations? Will they keep the system model so future updates cost less? Can they help with permit drawings, contractor coordination, or follow-up training? The best engineering consulting relationships continue well beyond the first project.

Red Flags to Watch For

  • A price far below every other proposal, which often means skipped field verification
  • No PE involvement, or a PE in another state with no local licensing
  • A scope that doesn’t mention labels, drawings, or recommendations
  • Reluctance to share a sample report
  • Promises of compliance without any discussion of your actual equipment

How Shaw Consulting Services Helps

We welcome these questions, because they’re the same ones we’d ask if we were hiring a firm ourselves. Shaw Consulting Services provides electrical engineering consulting services built around practical recommendations that fit the realities of your budget, schedule, and existing building. Based in Atlanta, we work with facility managers, building owners, and safety leaders who want an engineering partner that explains the why behind every finding. If you’re comparing proposals, bring this list to your first conversation with us.

Frequently Asked Questions

What does an electrical engineering consulting firm do?

It provides engineering analysis, design, and advisory services for electrical systems, including power system studies, arc flash assessments, load analysis, compliance guidance, and electrical design for renovations or new construction.

How much do electrical consulting services cost?

Costs depend on facility size, the number of devices modeled, the services included, and how complete your existing documentation is. Always compare detailed scopes rather than total price alone.

Should my consulting engineer be licensed in my state?

Yes. Work that requires a PE seal should be sealed by an engineer licensed in the state where the facility is located.

What is the difference between an electrical contractor and an electrical engineering consultant?

A consultant analyzes, designs, and recommends. A contractor installs and builds. Many projects need both, with the consultant defining what needs to be done and the contractor doing the physical work.

How long does a typical electrical engineering consulting project take?

Smaller studies can be completed in a few weeks. Larger facilities or design projects take longer, depending on data collection and the review process.